Safety templates for industrial cleaning and water jetting contractors
For industrial cleaning contractors whose crews jet, vacuum and chemically clean at plants, mills and mines in every province and territory. One manual written for the work, with the law and the jetting, confined space and static electricity rules of every jurisdiction side by side, and the exposure control plans the work calls for.
The manual · All provinces and territories
Industrial cleaning and water jetting safety manual
For water jetting, vacuum truck and chemical cleaning crews across Canada: jetting and hand lancing, exchanger cleaning, vac trucks, static and bonding, tank entry and toxic residues, with the law and jetting rules of every jurisdiction side by side.
- Editable Word (.docx) file, US Letter
- Written for water jetting, vacuum truck and chemical cleaning crews
- Every province and territory, and federal workplaces, in section 15
- Laid out on the 14 national COR elements, all 74 documentation questions cross-referenced
- 18 safe work practices, 8 safe job procedures and 38 print-ready permits and forms
- Lifetime updates at no extra charge
- Instant download, and re-download any time
Written for the hazards of the work
A general manual leaves these to you. This one has a practice, a procedure or a permit for each.
Water jet injuries
Injection wounds that look small and aren’t, and the medical alert card every operator carries.
Loss of control
Dump controls, minimum crews, barricades, and nobody in front of the lance.
Hoses and fittings
Rated for the pressure, whip checks, a hose register, and damaged hoses destroyed.
Vacuum trucks
Static, bonding and grounding, vapours at the exhaust and over-pressure.
Chemical cleaning
Acids, caustics and reactions, neutralizing and safe disposal.
Confined spaces
Tank and vessel entry, gas testing and rescue standby.
Residues
H2S, hydrocarbons, pyrophorics and NORM left in what you clean.
Long shifts
Nights, heat in jetting suits, fatigue and driving between sites.
Exposure control plans for this work
Each plan comes in 14 editions, every province and territory and federal workplaces, in English and French, in one purchase.
Jetting pumps, nozzles and vacuum blowers, often well over the limit.
$119.95
Sour residues in vessels, sumps and vac truck loads.
$119.95
Cleaning chemicals, hydrocarbons and the residues you remove.
$119.95
The program behind every respirator and supplied air set on the job.
$119.95
Buy the manual and plans in one order and the multi-template discount comes off the whole order: 10% off 2, 15% off 3, 20% off 4 or more.
Who it is for
Industrial cleaning, hydroblasting and vacuum truck contractors, and chemical, tank and sewer cleaning crews.
Your crews work under the owner’s permits and isolations and the law of the province or territory where the plant is.
Questions
Few provinces have rules written for water jetting. What does the manual do?
Section 15 shows which jurisdictions do, cites them, and says where only the general duties apply. The manual’s own jetting rules follow recognized practice everywhere, and the stricter rule always wins.
Is it laid out for COR?
Yes, on the 14 national elements every harmonized COR audit shares, with all 74 documentation questions cross-referenced. Each province’s certifying partner uses its own audit tool, so check the manual against the one you are certifying with. No template can promise a pass.
Do the exposure control plans cover every province too?
Yes. Every plan comes in 14 editions, one for each province and territory and one for federal workplaces, each in English and French, all in one purchase.
Do you discount the manual and plans together?
Yes. Two or more templates in one order take the multi-template discount automatically at checkout: 10% off 2, 15% off 3, 20% off 4 or more.
Can you tailor it for us?
Yes. Our safety advisors can fit the manual to your crews, your owners’ rules and the provinces you work in. Contact us at info@trustarsafety.com.