Safety templates for industrial coatings and abrasive blasting
For industrial painting, protective coatings and abrasive blasting contractors, wherever in Canada the job is. One manual written for the work, with each jurisdiction’s blasting, silica, lead, isocyanate and waste rules side by side, and the exposure control plans the work calls for.
The manual · All provinces and territories
Industrial coatings and abrasive blasting safety manual
For industrial painting and abrasive blasting contractors across Canada: blast equipment, breathing air, silica, lead removal, isocyanates, airless spray, tank interiors, containment and waste, with every jurisdiction’s rules side by side.
- Editable Word (.docx) file, US Letter
- Written for blasters, painters, sprayers and pot tenders
- Every province and territory, and federal workplaces, in section 15
- Laid out on the 14 national COR elements, all 74 documentation questions cross-referenced
- 20 safe work practices, 8 safe job procedures and 37 print-ready forms
- Lifetime updates at no extra charge
- Instant download, and re-download any time
Written for the hazards of the work
A general manual leaves these to you. This one has a practice, a procedure or a permit for each.
Deadman controls
Tested every shift, never tied down.
Breathing air
Checked before any hood goes on.
No silica sand
Abrasives chosen from the safety data sheet.
Test or presume
Old coatings treated as lead until tested.
Isocyanates
Supplied air for every sprayer.
Injection injuries
Straight to a surgeon, fast.
Tank entry
Isolation, gas tests and rescue ready.
Spent abrasive
Classified, logged and shipped as the law says.
Exposure control plans for this work
Each plan comes in 14 editions, every province and territory and federal workplaces, in English and French, in one purchase.
Buy the manual and plans in one order and the multi-template discount comes off the whole order: 10% off 2, 15% off 3, 20% off 4 or more.
Who it is for
Industrial painting, protective coatings and abrasive blasting contractors, on structures, tanks, bridges, pipelines and plant, and in the shop.
Your crews follow the law of the province or territory where the job is.
Questions
Can we still blast with silica sand where we work?
Section 15 sets out, for each jurisdiction, its abrasive blasting rules and any limit on silica in abrasives, alongside breathing air, lead, isocyanate and spray rules and who regulates hazardous waste. Where we couldn’t confirm a rule in the official text, it tells you who to check with.
Is it laid out for COR?
Yes, on the 14 national elements every harmonized COR audit shares, with all 74 documentation questions cross-referenced. Each province’s certifying partner uses its own audit tool, so check the manual against the one you are certifying with. No template can promise a pass.
Do the exposure control plans cover every province too?
Yes. Every plan comes in 14 editions, one for each province and territory and one for federal workplaces, each in English and French, all in one purchase.
Do you discount the manual and plans together?
Yes. Two or more templates in one order take the multi-template discount automatically at checkout: 10% off 2, 15% off 3, 20% off 4 or more.
Can you tailor it for us?
Yes. Our safety advisors can fit the manual to your crews, your owners’ rules and the provinces you work in. Contact us at info@trustarsafety.com.