Safety templates for manufacturers and fabrication shops
For manufacturers, metal fabricators, welding, machine and sheet metal shops, wherever in Canada the plant is. One manual written for the work, with the law and each jurisdiction’s guarding, lockout, crane, forklift and young worker rules side by side, and the exposure control plans the work calls for.
The manual · All provinces and territories
Manufacturing and metal fabrication safety manual
For manufacturers and fabrication, welding and machine shops across Canada: machine guarding, lockout, presses, welding and hot work, cranes, forklifts and robots, with every jurisdiction’s rules side by side.
- Editable Word (.docx) file, US Letter
- Written for fabricators, welders, machinists and plant operators
- Every province and territory, and federal workplaces, in section 15
- Laid out on the 14 national COR elements, all 74 documentation questions cross-referenced
- 20 safe work practices, 8 safe job procedures and 38 print-ready forms
- Lifetime updates at no extra charge
- Instant download, and re-download any time
Written for the hazards of the work
A general manual leaves these to you. This one has a practice, a procedure or a permit for each.
Machine guarding
Point of operation, light curtains and a yearly audit.
Lockout
A written procedure for every machine.
Presses and brakes
Safeguarding and tooling changes.
Welding and hot work
Fume, cylinders, permits and tanks.
Cranes and rigging
Overhead lifts and below-the-hook devices.
Forklifts and docks
Pedestrians, trailer creep and pre-use checks.
Robots and cells
Entering, teaching and locking out.
Young workers
Who may run which machine where you are.
Exposure control plans for this work
Each plan comes in 14 editions, every province and territory and federal workplaces, in English and French, in one purchase.
Buy the manual and plans in one order and the multi-template discount comes off the whole order: 10% off 2, 15% off 3, 20% off 4 or more.
Who it is for
Manufacturers, structural and miscellaneous metal fabricators, welding, machine and sheet metal shops, and equipment and trailer builders.
Your plant follows the law of the province or territory where it is; a second plant elsewhere follows that jurisdiction’s law.
Questions
Does it cover Ontario’s pre-start health and safety review?
Yes. Section 15 sets out when Ontario requires a pre-start review, along with each jurisdiction’s guarding, lockout, crane, forklift, welding and young worker rules, and where we couldn’t confirm a rule in the official text it tells you who to check with.
Is it laid out for COR?
Yes, on the 14 national elements every harmonized COR audit shares, with all 74 documentation questions cross-referenced. Each province’s certifying partner uses its own audit tool, so check the manual against the one you are certifying with. No template can promise a pass.
Do the exposure control plans cover every province too?
Yes. Every plan comes in 14 editions, one for each province and territory and one for federal workplaces, each in English and French, all in one purchase.
Do you discount the manual and plans together?
Yes. Two or more templates in one order take the multi-template discount automatically at checkout: 10% off 2, 15% off 3, 20% off 4 or more.
Can you tailor it for us?
Yes. Our safety advisors can fit the manual to your plant, your machines and the provinces you work in. Contact us at info@trustarsafety.com.