Safety templates for pipeline construction
For pipeline spreads, tie-in, integrity and directional drilling crews, wherever in Canada the right of way is. One manual written for the work, with each jurisdiction’s pipeline regulator, crossing, H2S and testing rules side by side, and the exposure control plans the work calls for.
The manual · All provinces and territories
Pipeline construction safety manual
For pipeline construction contractors across Canada: line crossings, sideboom lifts, tie-ins, welding, radiography, pressure testing, directional drilling and remote rights of way, with every jurisdiction’s pipeline regulator and rules side by side.
- Editable Word (.docx) file, US Letter
- Written for pipeline spreads, tie-in and integrity crews
- Every province and territory, and federal pipelines, in section 15
- Laid out on the 14 national COR elements, all 74 documentation questions cross-referenced
- 20 safe work practices, 8 safe job procedures and 37 print-ready forms
- Lifetime updates at no extra charge
- Instant download, and re-download any time
Written for the hazards of the work
A general manual leaves these to you. This one has a practice, a procedure or a permit for each.
Line crossings
Owner consent and hand exposure first.
Sideboom lifts
Load charts, lowering-in and the swing zone.
Bell hole tie-ins
Shoring, gas tests and isolation.
Pressure testing
Exclusion zones and verified zero.
Radiography
Licensed operators control the shot.
Directional drilling
Strike alarms, frac-outs and pullback.
Line strikes
Stop, get upwind, call the owner, then 911.
Regulators
The CER and each province’s rules.
Exposure control plans for this work
Each plan comes in 14 editions, every province and territory and federal workplaces, in English and French, in one purchase.
Sidebooms, drills, compressors and blasting.
$119.95
Buy the manual and plans in one order and the multi-template discount comes off the whole order: 10% off 2, 15% off 3, 20% off 4 or more.
Who it is for
Pipeline construction contractors: mainline spreads, gathering lines, tie-ins, integrity digs, directional drilling, maintenance, testing and commissioning.
Your crews follow the OHS law and pipeline regulator of the province or territory where the right of way is, or the Canada Energy Regulator on a federal line.
Questions
Does it cover federal pipelines under the Canada Energy Regulator?
Yes. Section 15 sets out who regulates a federal pipeline and a provincial one, alongside each jurisdiction’s ground disturbance and crossing, locate, hot work, H2S and pressure testing rules. Where we couldn’t confirm a rule in the official text, it tells you who to check with.
Is it laid out for COR?
Yes, on the 14 national elements every harmonized COR audit shares, with all 74 documentation questions cross-referenced. Each province’s certifying partner uses its own audit tool, so check the manual against the one you are certifying with. No template can promise a pass.
Do the exposure control plans cover every province too?
Yes. Every plan comes in 14 editions, one for each province and territory and one for federal workplaces, each in English and French, all in one purchase.
Do you discount the manual and plans together?
Yes. Two or more templates in one order take the multi-template discount automatically at checkout: 10% off 2, 15% off 3, 20% off 4 or more.
Can you tailor it for us?
Yes. Our safety advisors can fit the manual to your spreads, your owners’ programs and the provinces you work in. Contact us at info@trustarsafety.com.