Safety templates for scaffolding and industrial insulation contractors
For scaffolding and industrial insulation contractors in every province and territory. One manual written for the work, with the law and the scaffold, asbestos and trade rules of every jurisdiction side by side, and the exposure control plans the work calls for.
The manual · All provinces and territories
Scaffolding and industrial insulation safety manual
For scaffold and insulation crews across Canada: scaffold design, erection, inspection and tagging, fall protection, dropped objects, fibres, asbestos and lead, with the scaffold and asbestos rules of every jurisdiction side by side.
- Editable Word (.docx) file, US Letter
- Written for scaffold and industrial insulation crews
- Every province and territory, and federal workplaces, in section 15
- Laid out on the 14 national COR elements, all 74 documentation questions cross-referenced
- 18 safe work practices, 8 safe job procedures and 37 print-ready permits and forms
- Lifetime updates at no extra charge
- Instant download, and re-download any time
Written for the hazards of the work
A general manual leaves these to you. This one has a practice, a procedure or a permit for each.
Scaffold design
Load classes, ties and bracing, and an engineer when the law or our rules call for one.
Inspection and tags
Green, yellow and red tags, inspected every shift and after weather or changes. No tag, no use.
Falls while erecting
Continuous fall protection from the ground up, and a rescue plan before anyone climbs.
Dropped objects
Tethered tools and fittings, toe boards and exclusion zones below.
Fibres and dust
Mineral wool, ceramic fibre and silica, with HEPA vacuums and no compressed air.
Asbestos
The owner’s survey first, and stop work at anything suspect.
Hot and live equipment
Burns from hot lines, power lines and working beside live process equipment.
Cladding and lead
Sharp sheet metal, coatings and lead paint on old steel.
Exposure control plans for this work
Each plan comes in 14 editions, every province and territory and federal workplaces, in English and French, in one purchase.
Mineral wool and ceramic fibres, coatings and lead.
$119.95
Buy the manual and plans in one order and the multi-template discount comes off the whole order: 10% off 2, 15% off 3, 20% off 4 or more.
Who it is for
Scaffolding contractors, industrial insulation and cladding contractors, and companies that do both.
Your crews work under the owner’s permits and tag system and the law of the province or territory where the work is.
Questions
Scaffold and asbestos rules differ in every province. Does the manual cover them?
Yes. Section 15 sets out each jurisdiction’s scaffold rules, when an engineer is needed, inspection and tags, asbestos rules and the trades, and where the law is unclear it tells you who to check with.
Is it laid out for COR?
Yes, on the 14 national elements every harmonized COR audit shares, with all 74 documentation questions cross-referenced. Each province’s certifying partner uses its own audit tool, so check the manual against the one you are certifying with. No template can promise a pass.
Do the exposure control plans cover every province too?
Yes. Every plan comes in 14 editions, one for each province and territory and one for federal workplaces, each in English and French, all in one purchase.
Do you discount the manual and plans together?
Yes. Two or more templates in one order take the multi-template discount automatically at checkout: 10% off 2, 15% off 3, 20% off 4 or more.
Can you tailor it for us?
Yes. Our safety advisors can fit the manual to your crews, your owners’ rules and the provinces you work in. Contact us at info@trustarsafety.com.