Safety templates for roofing contractors
For residential and commercial roofing contractors, wherever in Canada the roof is. One manual written for roofing, with each jurisdiction’s fall protection, low-slope and hot work rules side by side, and the exposure control plans the work calls for.
The manual · All provinces and territories
Roofing safety manual
For roofing contractors across Canada: fall protection on steep and low-slope roofs, rescue, torch-on and kettles, hoists and tear-off, asbestos roofing and heat, with every jurisdiction’s roofing rules side by side.
- Editable Word (.docx) file, US Letter
- Written for roofers, foremen, kettle and torch operators
- Every province and territory, and federal workplaces, in section 15
- Laid out on the 14 national COR elements, all 74 documentation questions cross-referenced
- 20 safe work practices, 8 safe job procedures and 37 print-ready forms
- Lifetime updates at no extra charge
- Instant download, and re-download any time
Written for the hazards of the work
A general manual leaves these to you. This one has a practice, a procedure or a permit for each.
Rules by province
Heights, slopes and warning line rules.
Steep roofs
Ridge anchors, brackets and slide guards.
Low-slope edges
Guardrails, warning lines and monitors.
Fall rescue
A plan for each roof and a rescue procedure.
Torch-on
Hot work permits and a fire watch after.
Kettles and propane
Set-up, running and kettle fires.
Asbestos tear-off
Old roofing and the rules before removal.
Heat on roofs
A daily heat check and work-rest log.
Exposure control plans for this work
Each plan comes in 14 editions, every province and territory and federal workplaces, in English and French, in one purchase.
Buy the manual and plans in one order and the multi-template discount comes off the whole order: 10% off 2, 15% off 3, 20% off 4 or more.
Who it is for
Residential and commercial roofing contractors, sheet metal and flashing crews, and repair and eavestrough companies.
Your crews follow the law of the province or territory where the roof is.
Questions
Are warning lines and safety monitors allowed where we work?
Section 15 sets out, for each jurisdiction, the height and slope at which fall protection is required and what it accepts on a low-slope roof (warning lines, safety monitors, control zones), with the written plan and rescue. Where we couldn’t confirm a rule in the official text, it tells you who to check with.
Is it laid out for COR?
Yes, on the 14 national elements every harmonized COR audit shares, with all 74 documentation questions cross-referenced. Each province’s certifying partner uses its own audit tool, so check the manual against the one you are certifying with. No template can promise a pass.
Do the exposure control plans cover every province too?
Yes. Every plan comes in 14 editions, one for each province and territory and one for federal workplaces, each in English and French, all in one purchase.
Do you discount the manual and plans together?
Yes. Two or more templates in one order take the multi-template discount automatically at checkout: 10% off 2, 15% off 3, 20% off 4 or more.
Can you tailor it for us?
Yes. Our safety advisors can fit the manual to your crews, your builders’ rules and the provinces you work in. Contact us at info@trustarsafety.com.