Oil and gas exposure control plan pack (hydrogen sulphide, diesel exhaust, solvents and VOCs, noise, cold stress, respiratory protection)
Six exposure control templates chosen for oil and gas, in one order: plans for hydrogen sulphide, diesel exhaust, solvents and VOCs, noise and cold stress, and a respiratory protection program. Each comes in 14 editions, one for every province and territory and one for federally regulated workplaces, in English and in French: 168 editable Word files you make your own, for $449.95 instead of $719.70 bought separately.
A look inside
The covers of the six templates in the bundle. Each template’s page has sample pages from inside it.
What’s in the bundle
Hydrogen sulphide (H2S) exposure control plan
Oil and gas, sewers, manure and more: site hazard assessment, gas detection and alarm levels, supplied air, standby and rescue, 14 safe work procedures and 8 forms.
Diesel exhaust exposure control plan
Diesel particulate and exhaust gases, from warehouses and fire halls to mines: engine and ventilation controls, monitoring, 12 safe work procedures and 8 forms.
Solvents and VOCs exposure control plan
Paints, thinners, degreasers, adhesives and inks: limits and the mixture calculation, gloves by permeation data, cartridge change schedules, 14 safe work procedures and 8 forms.
Noise exposure control and hearing conservation plan
Noise assessment, buying quiet and engineering controls, hearing protector selection and fit, noise surveys and dosimetry, audiometric testing and 7 forms.
Cold stress exposure control plan
Winter, freezers and cold water: wind chill assessment, work and warm-up schedules, clothing and shelters, 10 safe work procedures, hypothermia and frostbite first aid and 8 forms.
Respiratory protection program
Every respirator, from disposables to supplied air and SCBA: selection, medical clearance, fit testing, change schedules, breathing air, 13 written procedures and 8 forms.
Who it is for
Producers, drilling and service contractors, and pipeline, plant and facility operators whose workers may meet sour gas, run diesel engines and equipment, clean and degrease with solvents, work around loud equipment and work outdoors through the winter.
Not the right six? Every plan is also sold on its own, and the complete library has all 20.
One layout, 14 editions
The templates share one layout. Section 1.3 of each edition sets out the law where you work, with pinpoint citations, Appendix A cross-references every provision it is written to meet, and Appendix B holds its print-ready forms, each with a form code.
Every purchase includes all 14 editions of each template, in English and in French. After you pay, you choose your jurisdiction and language once and download each of the six templates for it, on your confirmation page or in Find my downloads.
What you save
Bought separately, the six cost $719.70, $119.95 each. The pack is $449.95, a saving of $269.75.
The pack is already discounted, so the multi-template discount doesn’t apply to an order with it in it. When any of its templates gets a new edition, we email you its new files, free.
Lifetime updates
When the law changes, we publish a new edition of the template it affects and email everyone who bought it, on its own or in the bundle. Every update is free, for as long as we publish it.
Hydrogen sulphide (H2S) exposure control planVersion 1.1, October 4, 2026
Version 1.1 October 4, 2026
- Quebec: the plan now says that the prevention program identifies and analyzes the risks, and that the action plan, where there are fewer than 20 workers, identifies them.
- Federal: from January 30, 2027, the record of hazardous substances is kept 30 years after a substance was last used, produced, handled or stored, the full wording of the amended rule.
- Federal edition in French: the coming amendments to the Canada Occupational Health and Safety Regulations (SOR/2026-10) now use their official French wording.
Version 1.0 October 4, 2026
- First edition, in 14 jurisdiction editions (one for each province and territory, and one for federally regulated workplaces), each in English and French.
- Every legal reference checked against the official texts between October 2 and October 4, 2026. Each edition lists its sources and the date each was checked.
Diesel exhaust exposure control planVersion 1.1, October 4, 2026
Version 1.1 October 4, 2026
- Quebec: the plan now says that the prevention program identifies and analyzes the risks, and that the action plan, where there are fewer than 20 workers, identifies them.
Version 1.0 October 4, 2026
- First edition, in 14 jurisdiction editions (one for each province and territory, and one for federally regulated workplaces), each in English and French.
- Every legal reference checked against the official texts between October 2 and October 4, 2026. Each edition lists its sources and the date each was checked.
Solvents and VOCs exposure control planVersion 1.1, October 6, 2026
Version 1.1 October 6, 2026
- Prince Edward Island: section 1.3 now names the fire codes its Fire Safety Regulations adopt for storing and handling flammable liquids.
- Quebec: section 1.3 now sets out what the Fire Safety Act requires (ss. 2, 4 and 5).
Version 1.0 October 6, 2026
- First edition, in 14 jurisdiction editions (one for each province and territory, and one for federally regulated workplaces), each in English and French.
- Every legal reference checked against the official texts between October 5 and October 6, 2026. Each edition lists its sources and the date each was checked.
Noise exposure control and hearing conservation planVersion 1.2, October 6, 2026
Version 1.2 October 6, 2026
- French editions: a few sentences are reworded so they read correctly in every edition; in the federal edition this corrects grammar such as « le employé » (now « l’employé » or « la personne »).
Version 1.1 October 4, 2026
- Quebec: section 13 now explains what the Charter of the French language requires of written communications and training documents for workers (ss. 41 and 58), with a row in Appendix A.
- Quebec: the plan now says that the prevention program identifies and analyzes the risks, and that the action plan, where there are fewer than 20 workers, identifies them.
Version 1.0 October 3, 2026
- First edition, in 14 jurisdiction editions (one for each province and territory, and one for federally regulated workplaces), each in English and French.
- Every legal reference checked against the official texts between September 30 and October 3, 2026. Each edition lists its sources and the date each was checked.
Cold stress exposure control planVersion 1.1, October 4, 2026
Version 1.1 October 4, 2026
- Form F-12-01 now records the protective measures in effect and those actually used, beside the symptoms and treatment: the entries the federal rules require for each thermal stress incident from January 30, 2027.
- Federal: the thermal stress procedures due January 30, 2027 are described as the amended regulation describes them.
- Quebec: the plan now says that the prevention program identifies and analyzes the risks, and that the action plan, where there are fewer than 20 workers, identifies them.
- Federal edition in French: the coming amendments to the Canada Occupational Health and Safety Regulations (SOR/2026-10) now use their official French wording.
Version 1.0 October 4, 2026
- First edition, in 14 jurisdiction editions (one for each province and territory, and one for federally regulated workplaces), each in English and French.
- Every legal reference checked against the official texts between October 2 and October 4, 2026. Each edition lists its sources and the date each was checked.
Respiratory protection programVersion 1.0, October 6, 2026
Version 1.0 October 6, 2026
- First edition, in 14 jurisdiction editions (one for each province and territory, and one for federally regulated workplaces), each in English and French.
- Every legal reference checked against the official texts between October 5 and October 6, 2026. Each edition lists its sources and the date each was checked.
The complete library, or another industry pack
Need a different set of plans? These bundles hold other mixes, each priced below its plans bought one at a time. A bundle is already discounted, so the multi-template discount doesn’t apply to an order with one in it.
All provinces, territories and federal
Mining and quarrying exposure control plan pack (silica, diesel exhaust, noise, vibration, carbon monoxide, respiratory protection)$449.95
All provinces, territories and federal
Municipal and public works exposure control plan pack (noise, heat stress, cold stress, UV radiation, hydrogen sulphide, respiratory protection)$449.95
All provinces, territories and federal
Manufacturing and fabrication exposure control plan pack (welding fume and gases, noise, solvents and VOCs, isocyanates, hazardous substances, respiratory protection)$449.95
Questions
What is in the pack?
Six templates: plans for hydrogen sulphide, diesel exhaust, solvents and VOCs, noise and cold stress, and a respiratory protection program. Each comes in 14 jurisdiction editions, every province and territory and federal, in English and in French. That is 168 Word files; after you pay you choose your jurisdiction and language and download the six templates for it, on your confirmation page or in Find my downloads.
Which edition do I use?
The one for the law that covers the workplace: the province or territory where the work is done, or the federal edition if your business is federally regulated under Part II of the Canada Labour Code (for example, interprovincial trucking, airlines, railways, banks and telecommunications). If you are not sure which law covers you, confirm it with your regulator before you rely on an edition. All 14 come with every purchase, in English and French, so you never pay twice for the right one.
Do I need all six?
Only for the hazards in your work. A written plan is for the exposures your own hazard assessment finds, so you may need only some of them. If you need four or fewer, buying them on their own costs less, with the multi-template discount. If you already have one, buy the others on their own.
Why is the respiratory protection program in every pack?
Where a plan calls for respirators, they only protect when they are chosen for the hazard, fit tested, checked and looked after. The respiratory protection program covers all of that, written to the law of each jurisdiction, so it comes with every pack.
Can I add other templates to the same order?
Yes. The pack is already discounted, so the multi-template discount doesn’t apply to an order with it in it.
Is this legal advice? Will it make us compliant?
No. They are templates, not legal advice: complete plans written to the law with every requirement cited, as a starting point. A plan only works once a qualified person adapts it to your work and you put it in place and follow it, so no template can promise compliance.
How do updates work for the pack?
When any of the six templates gets a new edition, we email you its new files, free, as part of your lifetime updates.
Can I use it for more than one company?
Each purchase is licensed to one company. Consultants setting up programs for several clients should contact us.
Want it built for you?
Our safety advisors assess the hazards in your work and help you tailor the plan to it, from the risk assessment to the procedures your crews follow and the controls behind them.
Hazard assessments and control